Skip to main content

FOX 724

FOR SWINGING GATES

Electromechanical underground mounting actuator

For residential applications

24 Vdc

3,5 m | 800 kg

INVISIBLE

Compact irreversible electromechanical actuator housed inside its own 3mm thick steel foundation case. Two models: FOX 724 at 24 Vdc with built-in encoder and FOX 730 at 230 Vac 50 Hz with an external encoder.

ROBUST

Gearmotor with steel-steel and steel-brass worm screws, lubricated with grease, supported by radial bearings, fixed inside the watertight IP67 die-cast aluminum shell. The gearmotor is fastened to the foundation box with four stainless steel bolts. The anti-crushing protection system, thanks to the encoder’s action and constant amperometric monitoring, ensures the correct movement of the gate and the deceleration phases. It detects any obstacles and, upon detection, reverses the direction. The control programmer (ELPRO 42 for FOX 724 and ELPRO 43 for FOX 730) with D.S.A. autotest technology allows for safety device checks before each operation.

VERSATILE

The case is available in three versions: with electrolytic zinc plating, with hot-dip zinc plating and a cover made of AISI 304 stainless steel, and entirely made of AISI 304 stainless steel. In the event of a power outage to the system, the gate can be manually unlocked using the included shaped key, which directly acts on the gate’s movement lever. Included are movement levers with mechanical stops for gate rotation up to 105°, and special levers with chains for gate rotation up to 360° are available in the catalog.

Motor power supply

24 Vdc

Nominal absorption (A)

1

Maximum power consumption (A)

3,5

Motor power (W)

55

Maximum torque (Nm)

280

Opening time 90° (s)

13

Motor weight (kg)

10,5

Intermittent duty S3

intensive

IP Protection level

67

Working ambient temperature (°C)

-20 °C +50

Brochure